Filter
Top Products
To change the USB port menu settings:
1. Press MENU repeatedly until USB MENU appears on the display.
2. Press ITEM + repeatedly until the parameter you wish to change appears on the display
(e.g., SOFT RESET).
3. Press VALUE + to change the setting on the display (e.g., ENABLE).
4. Press SELECT to engage that setting (an Asterisk will appear next to the new setting).
5. Press ON LINE to save the setting and exit the menu.
USB Cable Requirements
The USB cable used with the printer must conform to the following specifications:
Compliance: Universal Serial Bus Revision 1.1, UL/CM/CSA approved
Plugs: Type "B" plug for connection to printer, Type "A" for connection to computer.
Approvals: UL, CM, CSA
Length: Maximum 16.5 ft. (5 m)
Network Interface
Network Interface
A 10/100 Base-T network print server is included as standard equipment on the OKI
®
Models
C9200n, C9200dxn and C9400dxn. For Model C9200, the network print server is an option that
can be added at a later date.
For details on supported operating systems, network protocols, and other print server
information, please refer to the on-line Network User's Guide for the OkiLAN
®
6200e print
server.
438