Filter
Top Products
edge (
) from the drop-down list.
6. Click OK and print the document.
Setting Duplex Printing as the Default: Windows 98/95
Setting Duplex Printing as the Printer Default: Windows 98/95 PCL
To set Duplex printing as the default in the Windows 98 & 95 PCL Driver:
1. Change the Duplex setting in the printer menu to ON.
2. Click Start → Settings → Printers.
The Printers dialog box appears.
3. Right click the OKI C9200 or C9400 PCL printer icon, then click Properties.
The OKI Properties dialog box appears.
4. Click the Layout tab.
5. Under 2-Sided printing, click Long edge (
) or Short edge ( ) binding from the drop-
down list.
Note: If these items are grayed out, you need to turn the duplex unit on in the driver.
6. Click OK and close the Printers dialog box.
Setting Duplex Printing as the Printer Default: Windows 98/95 PS
To set Duplex printing as the default in the Windows 98 & 95 PostScript Driver:
1. Change the Duplex setting in the printer menu to ON.
2. Click Start → Settings → Printers. The Printers dialog box appears.
3. Right click the OKI C9200 or C9400 PostScript printer icon, then click Properties. The
OKI PS Properties dialog box appears.
4. Click the Layout tab.
5. Under 2-sided printings, click your selection of Flip on long edge (
) or Flip on short
edge (
) from the drop-down list.
Note: If these items are grayed out, you need to turn the duplex unit on in the driver.
6. Click OK and close the Printers dialog box.
Fit to Page: Windows 98/95, PCL Only
This feature allows you to print a document on a different size media by reducing or enlarging it
to fit on the page. For example, you can proof a custom-size document on standard size paper,
reserving the special custom-size paper for use only for the final printing.
Using Fit to Page:
196