Filter
Top Products
RARP
Specifies whether or not RARP automatically resets.
IP ADDRESS
Sets IP address (see Changing the IP address).
SUBNET MASK
Sets subnet mask (see Changing the Subnet Mask).
GATEWAY ADDRESS
Sets gateway address (see Changing the Gateway Address).
INITIALIZE
Change the setting to ON if you wish the network to initialize whenever the menu is exited.
PRINT SETTINGS
Change the setting to ON if you wish to print a MenuMap including the results of a self-
diagnosis and a listing of the network settings. The MenuMap will print automatically when you
exit the menu mode.
Parallel Menu
Sets parameters for the parallel interface.
Defaults are red bold print.
Item (see descriptions below) Values
PARALLEL ENABLE, DISABLE
BI-DIRECTION ENABLE, DISABLE
ECP ENABLE, DISABLE
ACK WIDTH NARROW, MEDIUM, WIDE
ACK/BUSY TIMING ACK IN BUSY, ACK WHILE BUSY
I-PRIME 3 MICRO SEC, 50 MICRO SEC, DISABLE
126