Filter
Top Products
The OKI Properties dialog box appears.
4. Click the Watermark tab and select the watermark you wish to use from the Watermark
list (or create a new one).
5. To print the watermark only on the first page of the document, click First page only.
Otherwise the watermark will print on every page.
6. Click OK and print the document.
Modifying a Watermark: Windows Me PCL
To modify an existing watermark in the Windows Me PCL driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PCL printer icon and click Properties.
The OKI Properties dialog box appears.
3. Click the Watermarks tab, then click the watermark you wish to change:
4. Make your changes, then click Apply.
5. Click OK and close the Printers dialog box.
Deleting a Watermark: Windows Me PCL
To delete a watermark in the Windows Me PCL driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PCL printer icon, then click Properties.
The OKI Properties dialog box appears.
3. Click the Watermark tab, then click the watermark you wish to delete.
4. Click Remove then confirm the deletion by clicking Yes.
5. Click OK and close the Printers dialog box.
Watermarks: Windows Me PS
Creating & Storing Watermarks: Windows Me PS
To create and store a watermark in the Windows Me PostScript driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PostScript printer icon, then click Properties.
The OKI Properties dialog box appears.
3. Click the Watermarks tab.
4. Click New.
The New Watermark dialog box appears.
183