Filter
Top Products
Error number 45 - direction software over-travel
Error type: [KIND_ERR] error
Measures: [TYPE_E2] Stop deceleration.
Long:
Short:
Soft_OT_-_direction
-_Soft_OT
Main cause: Attempted to move to outside of the - direction area via positioning move, but the command unit
command value was outside of the - direction area.
Action to take: Perform an error reset operation. If the command unit command value is outside of the area, move to
the + direction. This error occurs only for the linear coordinates.
Error number 46 Emergency stop
Error type: [KIND_RGR] Always error
Measures: [TYPE_E2] Stop deceleration.
Long:
Short:
EmergencyStop
EMG_Stop
Main cause: An emergency stop instruction was entered.
Action to take: Reset the error.
Error number 49 Homing error
Error type: [KIND_ERRALM1] Error/operation alarm
Measures: [TYPE_E2] Stop deceleration.
Long:
Short:
OriginError
OriginErr
Main cause: An error occurred during homing operation.
[Subcode]
1: Locating fixture position problem
Action to take:
Error number 50 Cannot execute
Error type: [KIND_ERRALM2] Error/operation alarm
Measures: [TYPE_E2] Stop deceleration.
Long:
Short:
CantExec
CantExec
Main cause: Cannot execute.
[Subcode]
1: Prohibited command
2: Execution in progress
3: Error status
4: Data is being used.
5: Invalid data
6: Access timing
7: Driver mode
8: Invalid program file
9: Nesting overflow
Action to take: