Filter
Top Products
2. Installing Client Software
Printing Guide — Installing Client Software for UNIX 171
Creating a print queue manually on HP-UX
1. Log on to the root account.
2. Open your Linux/UNIX editor.
3. Create the following file.
/etc/lp/interfaces/<queue name>.conf
4. Add a line as below in the <queue name>.conf.
dest=<IP address>
5. Save the file.
6. Enter the following command:
chmod +x <queue name>.conf
7. Enter the following command:
chown lp:lp <queue name>.conf
8. Enter the following command:
ps -ef | grep lpsched | grep -iv grep > /dev/null 2>&1
9. Enter the following command:
Echo $?
10. If “0” is outputted on the screen, turn the scheduler OFF.
Enter the following command:
/usr/sbin/lpshut > /dev/null 2>&1
11. Enter the following command:
/usr/sbin/lpadmin -p <queue name> -v /dev/null \
-m net_est451c -o rm <queue name> -orpdssc -ob3
12. Enter the following command:
accept <queue name>
13. Enter the following command:
enable <queue name>
14. If you turn OFF the scheduler in step 10, turn the scheduler
ON. Enter the following command:
/usr/lpsched > /dev/null 2>&1
Creating a print queue manually on IBX AIX
1. Enter the following command:
ls /opt/toshiba/tap/filter
2. If the above directory does not exist, enter the following
command:
mkdir /opt/toshiba/tap/filter
3. Log on to the root account.