Filter
Top Products
3. Printing
214 Printing Guide — Printing from Windows
- Center Top — Select this to create holes on the upper side and print.
- Middle Left — Select this to create holes on the left side and print.
NOTES: • “None” can only be selected if a hole punch unit is not installed.
• “None” can only be selected when the Booklet printing is set at the Layout tab.
12) 2-Sided Printing
This sets 2-Sided printing (printing on both sides of paper) according to the type of
binding for 2-sided-printed pages.
This option is only for printing on both sides of the paper. If you want to bind the out-
put with staples, you should set the finishing option as well.
- None — Select this if you do not want to print on both sides of the paper.
- Book — Select this to print on both sides of the paper in the same direction and
to bind the document along the vertical side of the paper so that the pages can
be turned over right and left.
- Tablet — Select this to print on both sides of the paper with a vertical reversal
and to bind the document along the horizontal side of the paper so that the
pages can be turned over up and down.
NOTES: • “Book” or “Tablet” will be automatically selected when the Booklet printing is set at
the Layout tab.
• “None” can only be selected when Tab printing is enabled.
1
2
Portrait
1
2
Landscape
1
2
Portrait
1
2
Landscape