Filter
Top Products
2. Installing Client Software
96 Printing Guide — Installing Client Software for Windows
Installation for SMB Printing by Point and Print
The procedure to install the printer driver for SMB printing by Point and Print differs
depending on the version of Windows used.
P.96 "Windows 98/Me"
P.98 "Windows NT 4.0/2000/XP/Server 2003"
NOTE: It assumes using SMB printing by Point and Print in a small network. If you can use the
Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 as a print
server, it is recommended to set up for printing via Windows print server. For further
information about setting up printing via a Windows print server, see the Network
Administration Guide.
SUPPLEMENTS: • TopAccessDocMon is also available for SMB printing. To install TopAccessDocMon,
you must install it from the Client Utilities CD-ROM separately.
• The Agfa Font Manager is also available to install and manage the TrueType fonts
on your computer. To install the Agfa Font Manager, you must install it from the Cli-
ent Utilities CD-ROM separately.
— Windows 98/Me
Installing the printer drivers for SMB printing by Point and Print
1. Open this equipment in the network with Windows Explorer,
and double-click a queue in which the printer driver should
be installed (see below).
pcl5c — Double-click this queue to install the PCL5c printer driver.
pcl6 — Double-click this queue to install the PCL6 printer driver.
ps3 — Double-click this queue to install the PS3 printer driver.
• The Printers dialog box appears.
2. Click [Yes].
• The Add Printer Wizard dialog box appears.