Filter
Top Products
3. Printing
Printing Guide — Printing from Windows 219
2) Use Back Cover
This sets back cover printing which allows you to insert or print a back cover on a
sheet fed from a different tray than the Paper Source option selected on the Setup
tab.
To enable back cover printing, check on the box and select the location from where
a back cover sheet is to be fed and the print style to be used.
Source
Select the location from where a back cover sheet is to be fed. When “Automatic” is
selected, the paper is automatically selected according to the printed document
size.
NOTE: The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment and their configuration on the Configuration tab.
Print Style
This selects how you want to print a back cover.
- Do not print on page
— Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the last page image on the front
side of a cover.
- Print on both sides of page — Select this to print the last two page images on
both sides of a cover. This is available only when the 2-Sided Printing option is
enabled on the Setup tab.
NOTES: • If “Print on 1 side of page” is selected while 2-Sided Printing is performed, the last
page is printed on the front side of the cover sheet and back side of the cover will be
blank.
• If “Print on both sides of page” is selected but there is only one page printed on the
back cover, the last page is printed on the front side of the cover sheet and back
side of the cover will be blank.
3) Insert Page
This sets sheet insertion printing which allows you to insert a sheet between pages,
or print a specific page on a sheet fed from a tray other than the Paper Source
option selected on the Setup tab.
This option is useful when you want to insert a blank sheet between chapters, or
when you want to print chapter cover pages on the different paper.
To enable sheet insertion printing, check on the box and select the location from
where inserted sheets are to be fed and the print style to be used. Then, enter the
page number you want to insert in the Pages field.
NOTE: A sheet cannot be inserted before the first page when 2-Sided printing is enabled.
Source
Select the location from where insertion sheets are to be fed. When “Automatic” is
selected, the paper is automatically selected according to the printed document
size.
NOTE: The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment and their configuration on the Configuration tab.
Print Style
This selects how you want to print on insertion sheets.
- Do not print on page
— Select this to insert blank sheets.
- Print on 1 side of page — Select this to print the specified pages on the front
side of the insertion sheets.