Filter
Top Products
5. SYSTEM MODE EO18-33027
5.11 RFID Module Setting
5-83
5.11.5 Other / OTHER
The following information related RFID is displayed.
Tag test setting / TAG CHECK
Multi word write / MULTI WRITE
Carrier sense / CARRIER SENSE
5.11.5.1 Tag test setting / TAG CHECK
Disable / OFF Disable error tag detection: Printer read tag before writing data to tag,
but printer write data regardless the first data.
Enable(ID) / ON(ID) Enable error tag detection: Printer reads tag before writing data (EPC
area for Gen2 tag) to tag, and writing data if the first data is “A5A”.
Enable(Password) /
ON(ACCESS
PASSWORD)
Enable error tag detection: This is enabled for only GEN2 tag.
Printer reads access password area before writing data to tag and
write data if access pass word matches to password setting.
To prevent unauthorized changes of the setting, a password to protect the error tag detection setting can be
registered.
English Operation
The password input display is shown when protected password is enabled. The following
explanation is for when protected password is enabled.
Input 4 digit protected password.
It is displayed when password setting is ON.
The setting display of error tag is shown when protected password is correct.
The error message is displayed and change upper display is shown when protected password
is not correct.
Select tag test setting
Disable
Enable (ID)
Enable (Password)
When “Disable” or “Enable (ID)” is selected, protected password is disabled and upper display
is shown.
When “Enable (Password)” is enabled, access password input display is shown.
Input 8 digit accessible passwords
Set auto unlock password
Disable / OFF
Enable / ON
Set protected password.
Disable / OFF
Enable / ON
When “OFF” is selected, this menu is ended and the upper display is shown.
When “ON” is selected, protected password input display is shown.
Input 4 digit protected password.