Filter
Top Products
6. ON LINE MODE EO18-33027
6. ON LINE MODE
6- 7
Ex. 1
[ESC]PC001;0A
00,0300,2,2,A,00,B[LF][NUL]
Display
Ex. 2
[ESC]T20G
30[LF][NUL]
Display
Ex. 3
[ESC] PC002;0100,0300,15,15,A,00,00,J0101,+000000000A
,Z10,P1[LF][NUL]
display
(*2) When command error is displayed, the code except 20H-7FH, A0H-DFH are displayed as “?” (3FH).
(*3) When the ribbon near end detection is enabled, the error LED blinks 1Hz (50msec ON, 500msec
OFF) during ribbon near end and condition is from No.1 to No.3.
(*4) The battery check is not work when resetting and RTC is not mounted.
(*5) It is necessary to set any following item to use RTC function at low battery condition.
1 Turn off printer power from error condition, turn of printer by system mode, set date and time of
RTC, reset printer, and change to online condition.
2 Move to user mode by holding down [RESTART] key for 3 seconds, reset printer, set to online
condition, and set date and time by command.
* It is possible to printer by setting date and time till turning off printer.