Filter
Top Products
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.7 Wireless L AN BOARD (B-EX700-WLAN-QM-R)
4-39
4.7 WIRELESS LAN BOARD (B-EX700-WLAN-QM-R)
The following parts are supplied with the kit. Make sure you have all items shown below.
Wireless LAN Board (1 pc.)
Antenna Cover (1 pc.)
WLAN Card (1 pc.)
Installation Manual (1 copy)
M-3x6 Screw (4 pcs.)
FCC ID Sticker (1 pc.)
NOTES:
1. MAC address of the Wireless LAN module will be
necessary when setting the MAC address filtering function
of an access point. As it is printed on the WLAN card,
write it down on the Installation Manual before mounting
the covers so that an end user can know the MAC address.
2. Be careful not to hit or damage the antenna when
installing this kit. A damaged antenna may affect the
performance.
3. This module cannot be used together with the B-EX700-RS-QM-R Serial Interface Board.
Country Code
As available frequency bands are different from country to country, a proper country code must be set
before installing the wireless LAN board on a user’s printer. Use of a wireless LAN module with a wrong
country code could violate each country’s Laws and Regulations for Radio Equipment, and violators could
be subject to penalties.
For the country code setting, please ask TOSHIBA TEC subsidiaries.
FCC ID : MXF-S941212G
IC ID : 3069B-WSDB101G
MAC Address
(12-digit code)