Filter
Top Products
5. SYSTEM MODE EO18-33027
5.3 SELF-DIAGNOSTIC TEST
5-4
• Menu operation procedure example
English Procedure
Press [FEED] key and [RESTART] key when turning on the printer.
Display System Mode / SYSTEM MODE .
Select <1>Diagnostics/<1>DIAG. and press [ENTER] Key.
Display <1>Diagnostics/<1>DIAG. menu.
Select Counter, Parameter/MAINTENANCE CONT and press [ENTER] Key.
Display Counter, Parameter/MAINTENANCE CONT menu.
Select Print method / PRINT TYPE and press [ENTER] Key.
Display Print method / PRINT TYPE menu.
Setting printing method.
Display Counter, Parameter/MAINTENANCE CONT menu by pressing [ENTER].
Press [DOWN] Key, select Cut type/ CUT TYPE and press [ENTER] Key.
Display Cut type / CUT TYPE menu.
Setting Cut type / CUT TYPE .
Display Counter, Parameter/MAINTENANCE CONT menu by pressing [ENTER].
Press [DOWN] Key, select Print / CHECKING & PRINT and press [ENTER] Key.
Print Counter, Parameter/MAINTENANCE CONT .
Printing
Display “PRINTING”.
Normal printing
Display Counter, Parameter/MAINTENANCE CONT menu.
Print error occur
Display the error message and stop issuing.
The error LED turns on and the online LED
turns off.
Display Counter, Parameter/MAINTENANCE CONT menu by pressing [ENTER]
Key or [CANCEL] Key.
The error LED turns off and the online LED turns on.
After recovery from error, printer does not start printing automatically.