Filter
Top Products
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
4-54
5. Attach the Shield Label to the bottom of the Platen Holder Block.
6. Fit the Antenna Ass’y to the bottom of the Platen Holder Block.
NOTE: Align the Antenna Ass’y with the four
slots enclosed with circles.
Antenna Ass’y
Platen Holder Block
Shield Label
Guide of Attachment Position
Attach the Shield Label along the rib.
<When viewed from the bottom>
Platen Holder Block
CAUTION!
DO NOT DISASSEMBLE the Platen Holder Block.
Doing so will change the adjustment.
Rib
The Shield Label shall be positioned just
above the exposed part of the Antenna.
Platen side