Filter
Top Products
9. MAJOR UNIT REPLACEMENT EO18-33027
9.8 PLATEN
9-18
9.8 PLATEN
1) Open the top cover. (Refer to Section 3.1.)
2) Open the print head block.
3) Push the hook through the rectangle hole with a fine tool to remove the platen holder cover.
4) Remove the platen holder and the strip plate.
5) Pull the platen ass’y to the right until the entire pulley appears.
6) Pull the pulley forward.
7) Pull the platen to the left to detach it from the printer.
Platen Holder Cover
Hook
Push
Platen Holder
Strip Plate
Platen
Pulley
6)
7)
5)