Filter
Top Products
5. SYSTEM MODE EO18-33027
5.4 PARAMETER SETTING
5-25
5.4.1.1 Media loading / MEDIA LOAD
Disable / OFF Media loading function is disabled (Same as feed by machine’s key)
Standard / STD When printer is tuned on, printer is resettled batch, or head is closed, printer
detects gap/mark and feed the paper from sensor to thermal head which is home position.
Economy / ECO When power of batch process, head close, label is loaded. In this mode, printer
calculate the position based on previous saved label pitch then feed the label to head position.
Economy / ECO+Bfeed
5.4.1.2 Setting for forward feed standby / FORWARD WAIT
Disable / OFF Disable forward feed standby
Enable / ON Enable forward feed standby
5.4.1.3 Forward feed standby position / FORWARD WAIT POS.
Max. Min. Step Display Sign Integer
digit
Decimal
point
digit
0 fullfil Unit
5.0 -5.0 0.1 Decimal Exist 2 1 Non mm
+ (Plus) Rotate forward more then stop.
- (Minus) Rotate forward less then stop.
5.4.1.4 Standby action / FW/BK ACT.
MODE1 Wait at 13.7 mm forward rotation point.
MODE2 Wait at the position 6 mm reverse rotate and 3 mm forward rotate in case of
copy, transmissive sensor and cut issue.
5.4.1.5 HU CUT/RWD.
Selection of head up cut and rewinder usage for cut issue.
Head up cut is selected when cut issue is selected and internal rewinder usage is selected when
continuous issue is performed.
* Head up may not be performed due to solenoid temperature rise when head up issue is performed.
Disable / OFF Disable Head up and no rewinder usage.
Enable / ON Enable Head up and rewinder usage.