Filter
Top Products
5. SYSTEM MODE EO18-33027
5.3 SELF-DIAGNOSTIC TEST
5-12
2 2bit
NONE Non parity.
ODD Odd parity.
PARITY Parity selection
EVEN Even parity.
XON/XOFF
XON/XOFF protocol
(No XON output when the power is
on, no XOFF output when the
power is off)
READY/BUSY
READY/BUSY (DTR) protocol
(No XON output when the power is
on, no XOFF output when the power
is off)
XON+READY
AUTO
XON/XOFF + READY/BUSY (DTR)
protocol
(XON output when the power is on,
XOFF output when the power is off)
XON/XOFF
AUTO
XON/XOFF protocol
(XON output when the power is on,
XOFF output when the power is
off)
CONTROL Transmission control
method selection
READY/BUSY
RTS
RTS protocol
(No XON output when the power is
on, no XOFF output when the
power is off )
<< CENTRO >>
Item Content Print value
TYPE1 The ACK signal is sent to
match the rising edge of ACK
signal and the falling edge of
the BUSY signal.
ACK/BUSY Centronics ACK/BUSY
timing setting
TYPE2 The ACK signal is sent to
match the falling edge of ACK
signal and the falling edge of
the BUSY signal.
ON Reset is performed. INPUT PRIME Reset process when the
nInit signal is ON
OFF Reset is not performed.
ON Plug-and-play operation is
enabled.
PLUG & PLAY Plug-and-play operation
setting
OFF Plug-and-play operation is
disabled.
<< LAN/WLAN >>
Item Content Print value
OFF Disabled
AUTO Auto
LAN Wired LAN
LAN/WLAN LAN selection
WLAN Wireless LAN
ON Enable SNMP SNMP enabled/disable
OFF Disable
PRTR IP ADDRESS Printer IP address ***.***.***.***
GATE IP ADDRESS Gateway IP address ***.***.***.***
SUBNET MASK Subnet mask ***.***.***.***