Filter
Top Products
5. SYSTEM MODE EO18-33027
5.11 RFID Module Setting
5-79
5.11.3.4 Write retry / WRITE RETRY
Set the maximum number of retries to write data onto the RFID tag.
The printer retries to write data onto the RFID tag for up to specified number of times. If the time-out
has come before the maximum number of retries have been done, the printer stops the retries at the
time.
Max. Min. Step Display Sign Integer
digit
Decimal
point
digit
0 fullfil Unit
255 0 1 Decimal Non 3 0 Non times
Set the time-out for retry to write data onto the RFID tag.
If the printer has retried for the maximum number of times within the RFID write retry time-out, the
printer stops the retries at the time.
Max. Min. Step Display Sign Integer
digit
Decimal
point
digit
0 fullfil Unit
9.9 0.0 0.1 Decimal Non 1 1 Non second
5.11.4 UHF setting / UHF SETTING
The formation related UHF setting is displayed.
Output level / POWER LEVEL
Q value / Q VALUE
AGC threshold / AGC THRESHOLD
Write AGC threshold / WRITE AGC THRESHOLD
Write minimum AGC / WRITE RETRY MIN AGC
5.11.4.1 Output level / POWER LEVEL
Max. Min. Step Display Sign Integer
digit
Decimal
point
digit
0 fullfil Unit
*1 *1 1 Decimal Non 3 0 Non Non
It sets wireless output level of UHF.
The range of output level is 26 (approximately 500mW) to 9 (approximately 10mW).
*1: The maximum and minimum value vary depend on module setting and the value is below.
Initial value Max. value Min. value
B-SX704-RFID-U2-R 18 26 18
B-SX704-RFID-U2-EU-R/US-R /CN-R 18 18 9