Filter
Top Products
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
4-55
7. Fasten the lower part of the Earth Plate to the Platen Holder Frame with the screw securing the Platen
Holder Frame.
8. Secure the Antenna Ass’y to the Earth Plate with the SMW-3x6 screw.
4.10.4 Attaching the RFID Module
1. Fit the Bush into the hole as shown in the picture below.
Platen Holder Frame
Earth Plate
Bush
When viewed from the printer front side.
SMW-3x6