Filter
Top Products
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.10 UHF RFID KIT (B-EX700-RFID-U2-US/EU/CN-R)
4-56
2. Pass the Antenna Cable through the Bush.
3. Pull out the Antenna Cable from the opposite side, and pass it through the opening.
4. Connect the Antenna Cable to the RFID Module, as shown below.
5. Attach the two Module Attachment Plates with the PT-3x6 screws.
Module Attachment Plate
Module Attachment Plate
PT-3x6
PT-3x6
Antenna Cable
RFID Module
Antenna Cable
Opening
Bush
Antenna Cable