Filter
Top Products
5. SYSTEM MODE EO18-33027
5.11 RFID Module Setting
5-73
5.11 RFID Module Setting
Outline of the RFID Module Setting
In the RFID Module Setting mode, you can set various parameters related to the RFID module.
It is necessary to set these parameters before operating the RFID module.
If a read or write error occurs frequently, adjust the values for the parameters.
The RFID Module Setting menu contains the following:
MENU ITEM Display pattern and key
operation
System Mode / SYSTEM MODE Scroll display
<10>RFID SETTING / <10>RFID
Test / TEST
ID read / ID READ Information display
Module / MODULE Scroll display
Module type / MODULE TYPE
Country / COUNTRY
Tag type setting / TAG
RF channel / RF CHANNEL
Retry / RETRY
Position adjust for re-issue
/ ADJ RETRY POSITION
Setting value display
Retry issue label
/ ISSUE RETRY LABELS
Read retry / READ RETRY
Write retry / WRITE RETRY
UHF setting / UHF SETTING Scroll display
Output level / POWER LEVEL Setting value display
Q value / Q VALUE
Tag performance measurement
/ AGC THRESHOLD
Write threshold value
/ WRITE AGC THRESHOLD
Write retry min AGC
/ WRITE RETRY MIN AGC
Other Scroll display
Tag test setting / TAG CHECK
Multi word write / MULTI WRITE
Carrier sense / CARRIER SENSE