Filter
Top Products
5. SYSTEM MODE EO18-33027
5.3 SELF-DIAGNOSTIC TEST
5-9
ON
REFLECT+Bfe
ed
Perform back feed after
movement of ON
REFLECT.
ON ALL+Bfeed Perform back feed fter
movement of ON ALL.
PC-850 PC-850
PC-852 PC-852
PC-857 PC-857
PC-8 PC-8
PC-851 PC-851
PC-855 PC-855
PC-1250 PC-1250
PC-1251 PC-1251
PC-1252 PC-1252
PC-1253 PC-1253
PC-1254 PC-1254
PC-1257 PC-1257
LATIN9 LATIN9
PC-866 PC-866
Arabic Arabic
Character code selection
UTF-8 UTF-8
No slash used
FONT
Font “0” selection
Ø Slash used
AUTO Automatic selection
ESC LF NUL ESC LF NUL method
{ | } { | } method
CODE Control code type
×× ○○ Any set code (Described
in hex. code)
ON Selected PEEL OFF STATUS Peel-off wait status
selection
OFF Not selected
ON Send USB I/F STATUS USB interface status
OFF Not send
FEED One label is fed. FEED KEY [FEED] key function setting
PRINT Data in the image buffer is
printed on one label.
TYPE1 For WINDOWS codes KANJI Kanji code type
TYPE2 For original codes
EURO CODE Euro code setting
ON Automatic broken dots
check is performed.
AUTO HD CHK Automatic broken dots
check setting
OFF Automatic broken dots
check is not performed.
ON Enabled. WEB PRINTER Web printer function setting
OFF Disabled.
30m Ribbon near end state is
detected when the
remaining ribbon length is
approximately 30 m.
70m Ribbon near end state is
detected when the
remaining ribbon length is
approximately 70 m.
RIBBON NEAR END Ribbon near end detection
setting
OFF Ribbon near end state is
not detected.
TYPE1 Standard mode. EX.I/O MODE Expansion I/O operation
mode
TYPE2 In-line mode.