Filter
Top Products
4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
4.7 Wireless L AN BOARD (B-EX700-WLAN-QM-R)
4-40
1. Turn the printer power off and disconnect the Power Cord.
2. Remove the three B-4x5 screws from the Side Panel (L).
3. Slide the Side Panel (L) backward, and raise it to remove from the printer.
4. Unfold the upper tabs of the Blind Plate indicated by the arrow, then pull and remove the Blind Plate
from the printer back.
B-4x5 Screw
Side Panel (L)
B-4x5 Screw
Blind Plate
Tab
Tab