Filter
Top Products
ColorQube™ 9201/9202/9203 Authentication
System Administrator Guide 7-5
11. In the Authentication Server page, select [Kerberos (Windows 2000/2003)] from the Authentication
Type drop down menu.
12. In the Default Domain Controller (Required) area, enter details in the [Domain] field.
13. Select either [IPv4 Address], [IPv6 Address] or [Host Name] radio button.
14. If IPv4 or IPv6 Address is selected, enter the [IP Address] and [Port] and [Backup IP Address] and
[Port] details of the default Default Domain Controller.
15. If Host Name is selected, enter the [Host Name] and [Port] and [Backup Host Name] and [Port]
details of the Default Domain Controller.
Note
Entering the IP address negates the need for name to IP resolution. Entering the NetBIOS Name or host
name sends the name query request to either the WINS or DNS servers for resolution. Make sure the
addresses of the WINS or DNS servers have already been set up for use with this device (under
Connectivity/Protocols/Microsoft Networking or TCP/IP). Entering an IP Address or NetBIOS name can
also be useful in allowing local network SMB name query broadcasts through a router, if so desired.
16. Enter details for up to 8 [Alternate Domain Controllers (Optional)] and backups, if required.
17. Click on the [Save] button to save the settings and return to the Authentication Configuration page.
Set Authentication to control access to individual Services
18. In the Current Configuration area, click on the [View] button for Service Registration.
19. On the Service Registration screen, check the checkbox to select the services you want to display on the
machine touch interface.
20. Click on the [Save] button and return to the Authentication Configuration page.
Set Authentication to control access to individual Features
21. Select [Tools & Feature Access] in the directory tree under Access Right.
22. In the Tools & Feature Access page, under Presets, select either:
– Standard Access - Only Lock Tools
– Open Access - Unlock All Tools and Features
– Custom Access
If you select [Custom Access]
, for each feature you can either select [Unlocked] or [Locked] from the
drop down menu.
23. Click on the [Apply] button.
24. Click on the [OK] button when you see the window that says “Properties have been successfully
modified”.
25. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator, and
click on the [Logout] button.
Authentication Configuration for NDS (Novell)
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed.
• Ensure the NetWare protocol is enabled on your device by printing a Configuration Report.
At the Device