Filter
Top Products
ColorQube™ 9201/9202/9203 Authentication
System Administrator Guide 7-13
18. In the Tools & Feature Access page, under Presets, select either:
– Standard Access - Only Lock Tools
– Open Access - Unlock All Tools and Features
– Custom Access
If you select [Custom Access], for each feature you can either select [Unlocked] or [Locked] from the
drop down menu.
19. Click on the [Apply] button.
20. Click on the [OK] button when you see the window that says “Properties have been successfully
modified”.
21. Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator, and
click on the [Logout] button.
Adding User Accounts at the Device
1. Press the <Log In/Out> button to enter the Tools pathway.
2. Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch [Enter].
3. Press the <Machine Status> button, then the [Tools] tab.
4. Touch [Security Settings].
5. Touch [User / Administrator Accounts].
6. Read the on screen instructions to configure a User Account.
7. Touch [Configure Account], touch [User Account], enter a Passcode of 1 - 9 digits, and touch [Save
Account].
8. Touch [Close].
9. Press the <Log In/Out> button, then touch [Logout] to exit the Tools pathway.
802.1X Authentication
The device supports 802.1X authentication based on the Extensible Application Protocol (EAP). 802.1X can
be enabled for devices connected through both wired and wireless Ethernet networks. As described here, the
802.1X configuration is used to authenticate the device, rather than individual users. After the device has
been authenticated, it will be accessible to users on the network.
The administrator can configure the device to use one EAP type. EAP types currently supported on the device
are:
•EAP-MD5
• PEAPv0/EAP-MS-CHAPv2
• EAP-MS-CHAPv2
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed:
• Create a user name and password on your authentication server which will be used to authenticate the
Xerox device.
• Ensure your 802.1X authentication server and authentication switch are available on the network.