Filter
Top Products
System Administrator Guide 4-1
4
CentreWare Internet
Services
This chapter explains how to enable and use the Internet Services feature of the device.
The Internet Services feature uses the embedded HTTP Server on the device. This allows you to
communicate with the device through a web browser and gives you access to the Internet or intranet.
Entering the IP Address of the device as the URL (Universal Resource Locator) in the browser provides direct
access to the device.
Internet Services not only allow you to change basic settings as in the Control Panel, but also allows you to
change more specialized settings for the device.
Information Checklist
Before accessing Internet Services, please ensure the following items are available or have been performed:
• The device must be physically connected to the network with TCP/IP enabled so that Internet Services
can be accessed from a web browser.
• An existing operational workstation with TCP/IP Internet or Intranet accessibility is required.
• HTTP (HyperText Transfer Protocol) should be enabled on the device. HTTP is enabled by default. If you
need to enable HTTP, see Enable HTTP on the device on page 4-1.
Enable HTTP on the device
HyperText Transfer Protocol (HTTP) must be enabled on the device in order to access the embedded HTTP
server.
1. Press the <Log In / Out> button to enter the Tools pathway.
2. Enter the Administrator’s User Name [admin], touch [Next], enter Password [1111], touch [Enter].
3. Press <Machine Status>, then touch the [Tools] tab.
4. Touch [Network Settings].
5. Touch [Advanced Settings].
6. Touch [Continue].
7. Touch [HTTP Settings].
8. Touch [Enable].
9. Touch [Save].
10. Touch [Close].
11. Press the <Log In/Out> button, touch [Logout] to exit the Tools Pathway.