Filter
Top Products
Embedded Fax ColorQube™ 9201/9202/9203
15-4 System Administrator Guide
6. Touch the [Fax Country Setting]
7. Select the required (or nearest) country location by touching an entry in the [Country Selection] list.
8. Touch [Save].
9. Touch [Line 1] or [Line 2] Setup.
10. The Line 1 Setup screen appears.
11. Select the required Dial Type. For a tone line select [Tone]. For a 10 pulse per second line select [Pulse]. If
in doubt, touch [Tone].
Note
The Pulse/Tone feature is not available in some countries.
12. Enter the fax telephone number for the device by touching the [Fax Number] button and pressing the
buttons on the keypad. At least two digits must be entered here.
Note
Customers in the Czech Republic are advised to contact their Xerox Service Representative to perform
this task.
13. Optional step: enter a Line Name for the device by touching [Line Name] and using the on-screen
keyboard to enter a maximum of 30 characters.
14. Select the required option for the line by touching one of the buttons as follows under [Options]:
[Send and Receive]: the device is capable of sending and receiving fax transmissions.
[Send Only]: the device is only capable of sending faxes.
[Receive Only]: the device is only capable of receiving faxes.
15. Touch [Save] to exit the Line Setup screen.
16. Touch [Log In / Out] to exit the Tools pathway and the device will reboot with the new settings.
17. Test the fax connection by sending a fax document. Press the <Services> button.
18. Touch the [Fax] icon.
19. Enter the number of a nearby fax device using the keypad.
20. Place your documents in the document handler and press the <Start> button.
21. Verify that your documents are received at the other fax device.
You have completed the embedded fax setup. For detailed information about other embedded fax features,
refer to the Training and Information CD2 delivered with your device.