Filter
Top Products
ColorQube™ 9201/9202/9203 Security
System Administrator Guide 8-15
9. Click on the [Next] button to display the Step 2 of 2 screen.
If you Selected Manual Keying as the Keying Method:
1. In the Mode Selections area, select the [IPsec Mode] from the drop down menu, the default Mode is
Transport Mode.
2. In the Security Selections area, select preferred option and enter the required informations.
3. Click on the [Save] button.
If you Selected Internet Key Exchange (IKE) as the Keying Method:
1. In the IKE Phase 1 area, for [Key Lifetime] enter Key Lifetime details, and select required option from
the [DH Group] drop-down menu and check the required [Hash - Encrypt] boxes.
2. In the IKE Phase 2 area, select mode from the [IPSec Mode] drop-down menu.
a. If you select [Tunnel Mode], then select either [Disabled], [IPv4 Address] or [IPv6 Address].
b. If you select IPv4 Address or IPv6 Address, enter IP Address details.
3. Select type of security from the [IPsec Security] drop-down menu.
4. Enter details in the [Key Lifetime] field.
5. Select the preferred option from the [Perfect Forward Secrecy] drop-down menu, default is ‘None’ and
check the boxes for [Hash] and [Encryption].
Note
Encryption will not display if [IPsec Security] is set to AH.
6. Click on the [Save] button.