Filter
Top Products
CHAPTER 4 IMAGE FORMATION SYSTEM
4–34
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 4-318
A
Figure 4-319
4) Free a length of about 5 cm from the
charging wire reel (0.06 mm wire).
Reference:
To form a loop, wind the charging wire
around a hex key once, and turn the hex
key three to four times; then, twist the
charging wire.
5) Cut the end (excess) of the twisted
charging wire with a nipper.
6) Hook the loop on the charging electrode
at the rear.
7) Hook the charging wire on the charging
wire positioner at the rear, and hook the
charging wire tension spring on the
charging wire by the distance A; then,
twist it.
A:
Primary charging assembly : 13.0 ±0.5 mm
Transfer charging assembly : 12.0 ±0.5 mm