Canon NP7161 All in One Printer User Manual


 
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
6–3
CHAPTER 6 FIXING SYSTEM
182 mm > Paper Width
Table 6-104
Temperature detected by
thermistor at Start key on
Target temperature immediately
after Start key on
Target temperature during
continuous copying (upper limit)
Less than 170°C
170°C or more, less than 180°C
180°C or more, less than 190°C
190°C or more
175°C
186°C
194°C
200°C
196°C
204°C
208°C
215°C
165°C
176°C
184°C
190°C
200°C 215°C 190°C
General plain paper
Paper with rough surface
Tracing paper
General plain paper
Paper with rough surface
Tracing paper
From Power-On to End of Copying
Figure 6-102
120°C
140°C
160°C
180°C
200°C
220°C
*1
Start key
ON
Power switch
ON
WMUP WMUPR STBY INTR COPY LSTR STBY
Sequence
Main motor (M1)
Fixing heater (H1)
Wait indicator
Green(flashing) Orange
*1:Varies according to paper width.
General plain paper mode
Tracing paper mode
Paper with rough surface mode
Target temperature control