Filter
Top Products
CHAPTER 8 INSTALLATION
8–2
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Step Work Checks/remarks
Open the shipping box, and take out
the two cardboard boxes.
1
Check to make sure that none of the following is
missing:
• copy tray
• power cord
• drum unit
• User’s Manual
• waste toner case (3 pc.)
• waste toner case bag (4 pc.)
• top unit close label
Open the cardboard boxes, and take
out the attachments.
2
II. UNPACKING AND INSTALLATION
When a piece of metal is brought in from a cold to warm place, droplets of water tend to
form on its surface. This phenomenon is known as condensation, and copiers suffering from
condensation can generate blank copies.
If the copier has been brought in from a cold place, keep it unpacked for one hour or more
before starting the installation work.
The copier weighs about 42 kg/92.4 lb. Be sure to work in a group of two when lifting it.
A. Unpacking
Holding the grips at the bottom (both
sides), move the copier to the site of
installation.
3
Grips
Grips