Canon NP7161 All in One Printer User Manual


 
1–10
COPYRIGHT
©
1998 CANON INC. CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 1 GENERAL DESCRIPTION
IV. OPERATING THE MACHINE
A. Control Panel
ID
2 31
5 64
8 97
0 C
Reset
Additional
Functions
Interrupt
Clear
Start
Stop
Energy Saver
Auto Zoom
%
Zoom
Paper Select
Auto Paper
A3/1117
A4/LTR
A4/LTR
B4/LGL
B5 U1
R
B5 U2
R
123
Reduce
1 : 1
Enlarge
Max. 200%
A4/LTR A3 B5 B4
A4/LTR B4
B4 A3 B5 A4/LTR
1 : 1
A3 B4 A4/LTR B5
B4 A4/LTR
A3 B5A4/LTR B4
Min. 50%
Fit Image
Image Combination
Two-page Separation
Photo
A
Sort
Staple-
Sort
Group
ON/OFF
[1]
[2] [3]
[5]
[4]
[9][8]
[7]
[6]
[16]
[15]
[14][13]
[12]
[11][10]
[17]
[18]
1[9]
[21]
[22]
[23] [24][25][26][27] [28]
[20]
Ref. Name
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Description Remarks
*Requires a sorter or
stapler sorter.
*Requires an ADF.
Requires a Control
Card Unit.
* Applies to the NP7161 only
Sorter key*
Sorter indicator*
2-on-1*/Page
Separate key
Fit Page key
Photo key
Reduce/Direct/
Enlarge key
Default Ratio indicator
Control Card indicator
Jam indicator
Toner indicator
Paper indicator
Paper Source/Jam
Press it to select or deselect Sort, Staple Sort, or
Group Sort mode.
Indicates the selected delivery mode. It remains
off in non-sort mode.
Press it to select or deselect 2-on-1 or Page
Separate mode.
Press to select or deselect Fit Page mode. Use
the mode to make a copy covering all image area
of the original.
Press it to select or deselect Photo mode.
Press it to select Reduce/Enlarge (default ratio) or
reset any ratio to Direct.
Indicates the selected default reproduction ratio.
Flashes when the control card is not set properly.
Flashes when a jam occurs.
Flashes when toner is running out. It stops
flashing and remains on when toner runs out
completely.
Flashes if paper runs out in the selected cassette
or the manual feed tray (or, when the cassette is
not set properly).
Indicates the selected cassette or the manual tray;
flashes the location of a jam, if any. (It also
flashes when a jam occurs in the ADF or when the
sorter or the right door needs to be checked.)
Figure 1-401
Table 1-401