Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
4–35
CHAPTER 4 IMAGE FORMATION SYSTEM
8) Cut the excess charging wire with a
nipper.
9) Pick the end of the charging wire
tensioning spring with tweezers, and hook
it on the charging electrode.
Note:
Go through the following:
• Be sure that the charging wire is free
of bending and twisting, and its gold
plating has not peeled.
• Be sure that the charging wire is in
the V-groove of the charging wire
positioner.
10) Wipe the charging wire with lint-free
paper moistened with alcohol.
Caution:
• Do not use a cloth carrying metal
powder for cleaning.
• Do not use a moist cloth for
cleaning.
• Dry wipe with lint-free paper; then,
mount only after making sure that
alcohol has completely evaporated.
11) Mount the sheet (front) and the sheet
(rear).
12) Mount the stopper and the grid plate.
For the transfer charging assembly, mount
the guide wire plate.
Figure 4-320
Figure 4-321
(correct) (wrong)