Filter
Top Products
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
7–10
COPYRIGHT
©
1998 CANON INC. CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remove the appropriate covers as follows
when cleaning, checking, or repairing the
inside of the copier.
Covers which may be detached by mere
removal of mounting screws are omitted from
the discussions.
1. Removing the Right Door
1) Open the right door.
2) Remove the four mounting screws [1],
and remove the right door [2] and the
paper guide [3].
Caution:
When mounting the paper guide, be
sure to fit the foot of the spring [4] at
the rear into its hole.
2. Removing the Upper Right Cover
1) Open the top unit.
2) Remove the two mounting screws [1], and
remove the right cover [2].
3) Remove the two mounting screws [3], and
remove the upper right cover [4].
[4]
[3]
[2]
[1]
Figure 7-304
[1]
[2]
[3]
[4]
Figure 7-305