Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
1–11
CHAPTER 1 GENERAL DESCRIPTION
Ref. Name
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
[23]
[24]
[25]
[26]
[27]
[28]
* Applies to the NP7161 only
Description Remarks
[10]
[11]
[12]
[13]
[14]
*Requires an ADF.
*Requires an ADF.
Flashes when the waste toner box needs to be
replaced. When the case becomes full, it stops
flashing and remains on.
Indicates the size of the paper in the cassette
selected by the Paper Select key.
Press it to select Auto Paper Select*, Cassette, or
Manual Feed Tray mode.
Indicates the copy count/ratio and the selected
user mode.
Use it to select or deselect Auto Ratio mode, in
which the best reproduction ratio is automatically
selected to suit the original and the selected
paper.
Press it to indicate the selected reproduction ratio.
Use it to reset the current copy mode to default.
Use it to set a copy count or to enter a numeric value.
Press it to start copying.
Press it to stop continuous copying.
Press it to select or deselect power save mode.
Press it to turn on or off the power.
Slide it to adjust the copy density manually.
Press it to select or deselect AE (auto density
adjustment) mode.
Press it to select a reproduction ratio (50% to
200%) in 1% increments. Hold it down to
increase/decrease the ratio continuously.
Press it to set or change user mode settings.
Press it to stop an ongoing copying run to make a
copy of a different original.
Press it after entering an appropriate ID number.
Press it also after entering a number for ID
registration.
Press it to reset the copy count to 1 or to clear any
wrong input when making settings.
Location indicator
Paper Size indicator
Paper Select key
Copy Count/Ratio
indicator
Auto Ratio key*
% key
Reset key
Keypad
Start key
Stop key
Power Save key
Power switch
Copy Density
lever
AE key
Zoom key
User Mode key
Interrupt key
ID key
Clear key
Table 1-402