Filter
Top Products
CHAPTER 4 IMAGE FORMATION SYSTEM
4–38
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
4) Lift the front of the developing upper
cover [6] slightly, and slide it in the
direction of the arrow to remove.
[6]
Figure 4-327
[8]
[7]
[2]
[1]
Figure 4-328
Figure 4-329
5) Place a newspaper or the like on the floor,
and empty the developing assembly of
toner.
6) Put copy paper between the developing
blade and the developing cylinder.
7) Remove the two mounting screws [7], and
remove the developing blade [8].
Caution:
When mounting the developing blade,
be sure to put copy paper on the
developing cylinder before mounting
the developing blade so as to protect
the cylinder.
3. Removing the Developing Cylinder
1) Remove the developing blade. (See p. 4-
37.)
2) Remove the mounting screw [1], and
remove the magnet positioning plate [2].