Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
3–19
CHAPTER 3 EXPOSURE SYSTEM
2. Removing the Mirror Motor
1) While the copier is in standby state, press
the Enlarge key to move the lens and the
No. 4/No. 5 mirror unit to 200% position.
2) Turn off the power switch, and disconnect
the power plug.
Caution:
Whenever you are disassembling/
assembling the copier, be sure to turn
off the power switch and disconnect
the power plug.
3) Remove the copyboard glass. (See p.7-14)
4) Remove the developing assembly.
(See p.4-37)
5) Remove the drum unit. (See p.4-28)
6) Remove the upper right cover. (See p.7-
10)
7) Disconnect the connector [1].
Figure 3-515
[1]