Filter
Top Products
CHAPTER 5 PICK-UP/FEEDING SYSTEM
5–24
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
D. Cassette Assembly
1. Removing the Cassette Size Switch
1) Remove the cassette.
2) Remove the delivery lower cover. (See
p.7-11)
3) Disconnect the connector [1] (J110) of the
DC controller PCB, and remove the
mounting screw [2] ; then, free the
harness from the harness guide.
4) Remove the mounting screw [3], and
remove the stopper [4].
5) Remove the cassette switch assembly [5].
6) Remove the hook [6], and remove the
cassette size switch [7].
Caution:
When mounting the cassette size
switch assembly, check to make sure
that the cassette size switch assembly
slides normally by the work of the
spring [8] pressure.
[3]
[4]
[5]
[2]
[1]
Figure 5-624
Figure 5-625
Figure 5-626
[7]
[6]
[8]