Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5–17
CHAPTER 5 PICK-UP/FEEDING SYSTEM
[1]
[3]
[2]
[4][2]
Figure 5-603
[5]
[5]
[6]
Figure 5-604
[1]
[2]
[2]
Figure 5-605
3. Removing the Pick-Up Drive
Assembly
1) Remove the registration roller assembly.
(See p. 5-23.)
2) Remove the E-ring [1], and slide the
vertical path roll [2] in the direction of the
arrow.
3) Remove the bushing [3], and then vertical
path roller [2] together with the gear [4].
4) Remove the four mounting screws [5],
and remove the pick-up drive assembly
[6].
4. Removing the Pick-Up Assembly
1) Remove the separation roller assembly.
(See p. 5-18.)
2) Remove the registration roller assembly.
(See p. 5-23.)
3) Disconnect the connector [1], and remove
the two screws [2].