Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5–15
CHAPTER 5 PICK-UP/FEEDING SYSTEM
VI. DISASSEMBLY/ASSEMBLY
The copier may be disassembled and assembled as shown here. Pay attention to the copier’s
mechanical characteristics along with the steps for disassembly/assembly.
Important:
1. Turn off the power and disconnect the power plug to ensure safety whenever disassembling/
assembling the copier.
2. Unless otherwise noted, assemble the parts by reversing the steps used to disassemble them.
3. Identify the screws by type (length, diameter) to avoid use in the wrong location.
4. Use a washer where needed. The mounting screws used for the grounding wire and varistor
come with a washer to ensure electric continuity. Do not forget to use these washers.
5. As a rule, do not operate the copier with any of its parts removed.