Filter
Top Products
CHAPTER 8 INSTALLATION
8–12
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Make a copy in Direct.
Take out all copy paper from the
cassette.
Excute ‘403’ in service mode.
The scanner, lens, and No.4/No.5
mirror unit move to the position for
transportation.
Turn off the power switch, and
disconnect the power plug from the
power outlet.
Secure the scanner in place using the
two scanner fixing screws from the
left side of the copier.
Take out the drum unit, and mount the
dummy drum.
Remove the copy tray.
Tape the front door, multifeeder tray,
and cassette in place.
Place A3 copy paper on the
copyboard glass, and tape the
copyboard in place.
1
2
3
4
5
6
7
8
9
The drum unit must be
transported separately.
Use the screws
removed during
installation work.
III. RELOCATING THE MACHINE
If you need to relocate the machine by truck or any other means of transportation, perform
the following:
Step Work Checks Remarks