Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
3–13
CHAPTER 3 EXPOSURE SYSTEM
Figure 3-503
[3]
[1] [2]
2. Removing the Scanner Drive Cable
1) In standby state, press the Reduce key so
that the lens and the No.4 /No.5 mirror
unit move to 70% reproduction position.
2) Turn off the power switch, and disconnect
the power plug.
Caution:
Whenever you need to perform
disassembly/assembly work, be sure to
turn it off and disconnect its power
plug.
3) Remove the lens hood.
(See p. 3-20.)
4) Remove the scanner motor.
(See p. 3-12.)
5) Remove the control panel
(See p. 7-13.)
6) Remove the upper left cover.
(See p.7-11.)
7) Remove the upper right cover.
(See p.7-10.)
8) Detach the lock support [1] from the
connector base [2].
9) Remove the two mounting screws [3], and
pull out the connector base [2].