Filter
Top Products
CHAPTER 8 INSTALLATION
8–16
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[11]
[7]
[8]
Figure 8-504
Figure 8-506
Figure 8-505
4) Lead the harness through the opening in
the rear cover made by cutting off the face
plate in step 3), and connect the connector
[7] and the copier’s connector [8] (8P).
(At this time, be sure to fit the harness in
the harness guide as shown.)
5) Mount the rear cover and the grounding
wire [9] (attachment) to the copier, and
secure the device to the rear cover
together with the grounding wire [9] with
four screws [10] (use the screws that
come with the device).
6) Remove the slack from the cable between
the copier and the device, and bundle
together any excess length and secure it in
place with the harness band [11].
[9][10]