Filter
Top Products
COPYRIGHT
©
1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
5–21
CHAPTER 5 PICK-UP/FEEDING SYSTEM
Figure 5-616
[3]
[2]
[1]
Figure 5-617
[1]
Figure 5-618
[4]
[4]
[5]
[3]
The two holes each
(upper/lower) are
spare holes.
4) Disconnect the two connectors [3], and
remove the three mounting screws [4];
then, detach the multifeeder assembly [5].
3. Removing the Multifeeder Pick-Up
Roller
1) Remove the developing assembly. (See p.
4-37.)
2) Remove the drum unit. (See p. 4-28.)
3) Remove the E-ring [1]; then, while
pushing down the multifeeder separation
pad [2] to free it from pressure, detach the
multifeeder pick-up roller [3].
4. Removing the Separation Pad
1) Execute service mode 402 (multifeeder
holding plate release) in standby state so
as to lift the multifeeder holding plate [1].