Filter
Top Products
Contents
x
Cisco ONS 15454 Installation and Operations Guide
November 2001
7.2.2 DS-3 Card Parameters 7-6
Procedure: Modify Line and Threshold Settings for the DS-3 Card 7-6
7.2.3 DS3E Card Parameters 7-8
Procedure: Modify Line and Threshold Settings for the DS3E Card 7-9
7.2.4 DS3XM-6 Card Parameters 7-11
Procedure: Modify Line and Threshold Settings for the DS3XM-6 Card 7-12
7.2.5 EC1-12 Card Parameters 7-14
Procedure: Modify Line and Threshold Settings for the EC-1 Card 7-14
7.3 Provisioning Optical Cards 7-18
7.3.1 Modifying Transmission Quality 7-18
Procedure: Provision Line Transmission Settings for OC-N Cards 7-18
Procedure: Provision Threshold Settings for OC-N Cards 7-19
7.3.2 Provisioning OC-N Cards for SDH 7-23
Procedure: Provision an OC-N Card for SDH 7-23
7.4 Provisioning IPPM 7-24
Procedure: Enable Intermediate-Path Performance Monitoring 7-25
7.5 Provisioning the Alarm Interface Controller 7-25
7.5.1 Using Virtual Wires 7-26
Procedure: Provision External Alarms 7-27
Procedure: Provision External Controls 7-28
7.5.2 Provisioning AIC Orderwire 7-29
Procedure: Provision AIC Orderwire 7-29
7.5.3 Using the AIC Orderwire 7-30
7.6 Converting DS-1 and DS-3 Cards From 1:1 to 1:N Protection 7-30
Procedure: Convert DS1-14 Cards From 1:1 to 1:N Protection 7-31
Procedure: Convert DS3-12 Cards From 1:1 to 1:N Protection 7-33
CHAPTER
8 Performance Monitoring 8-1
8.1 Using the Performance Monitoring Screen 8-1
8.1.1 Viewing PMs 8-2
Procedure: View PMs 8-2
8.1.2 Changing the Screen Intervals 8-2
Procedure: Select Fifteen-Minute PM Intervals on the Performance Monitoring Screen 8-3
Procedure: Select Twenty-Four Hour PM Intervals on the Performance Monitoring Screen 8-4
8.1.3 Viewing Near End and Far End PMs 8-4
Procedure: Select Near End PMs on the Performance Monitoring Screen 8-5
Procedure: Select Far End PMs on the Performance Monitoring Screen 8-5
8.1.4 Using the Signal-Type Menu 8-6
Procedure: Select Signal-Type Menus on the Performance Monitoring Screen 8-6