Filter
Top Products
9-12
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 9 Ethernet Operation
Ethernet Circuit Configurations
Figure 9-11 Selecting VLANs
e. Highlight the VLAN name and click the >> tab to move the VLAN(s) from the Available VLANs
column to the Circuit VLANs column (Figure 9-11).
By moving the VLAN from the Available VLANs column to the Circuit VLANs column, all the VLAN
traffic is forced to use the shared packet ring circuit you created.
Step 22 Click Next.
Step 23 Uncheck the Route Automatically checkbox and click Next.
Figure 9-12 Adding a span
Step 24
Click either span (green arrow) leading from the source node (Figure 9-12).
The span turns white.
Step 25 Click Add Span.
The span turns blue and adds the span to the Included Spans field.
Step 26 Click the node at the end of the blue span.