Filter
Top Products
8-6
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 8 Performance Monitoring
Using the Performance Monitoring Screen
8.1.4 Using the Signal-Type Menu
Use the signal-type menus to monitor PMs for near-end or far-end signals on a selected port. Different
signal-type menus appear depending on the card type and the circuit type. The appropriate types (DS1,
DS3, VT path, STS path, OCn section, line) appear based on the card. For example, the DS3XM has DS3,
DS1, VT path, and STS path PMs. Figure 8-4 shows the signal-type menus on the Performance
Monitoring screen for a DS3XM-6 card.
Figure 8-4 Signal-type menus for a DS3XM-6 card
Procedure: Select Signal-Type Menus on the Performance Monitoring Screen
Step 1 Open the electrical or optical card of choice. Double-click the card’s graphic in the main (node) view or
right-click the card and select Open Card. (Clicking a card once highlights the card only.)
Step 2 From the card view, click the Performance tab.
Step 3 Click the signal-type menu. (For example, the DS3XM card has menus labeled DS3, DS1, VT, and STS.)
Step 4 Select a port using the signal-type menu.
55376
Signal-type menus