Filter
Top Products
7-4
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter 7 Card Provisioning
Provisioning Electrical Cards
Step 3 Depending on the setting you need to modify, click the Line, Line Thrshld, Elect Path, or Sonet
Thrshld subtab.
Note See Chapter 10, “Alarm Monitoring and Management” for information about the Alarm
Behavior tab.
Step 4 Modify the settings shown in Table 7-2 on page 7-4. For drop-down lists, select an item from the list.
For numerics, double-click the field and type the new number.
Table 7-2 DS-1 Card Parameters
Subtab Parameter Description Options
Line
Port # Port number 1 - 14
Port Port name To enter a name for the port, click the
cell and type the name. To change a
name, double-click the cell, then edit
the text.
Line Type Defines the line framing type
• D4 (default)
• ESF - Extended Super Frame
• Unframed
Line
Coding
Defines the DS-1 transmission
coding type
• AMI - Alternate Mark Inversion
(default)
• B8ZS - Bipolar 8 Zero Substitution
Line
Length
Defines the distance (in feet)
from backplane connection to
the next termination point
• 0 - 131 (default)
• 132 - 262
• 263 - 393
• 394 - 524
• 525 - 655
Status Places port in or out of service
• Out of Service (default)
• In Service
Line
Thrshold
CV Coding violations Numeric. Defaults:
• 13340 (15 min)
• 133400 (1 day)
ES Errored seconds Numeric. Defaults:
• 65 (15 min)
• 648 (1 day)
SES Severely errored seconds Numeric. Defaults:
• 10 (15 minutes)
• 100 (1 day)