Filter
Top Products
48-41
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 48 Configuring Inspection for Voice and Video Protocols
Skinny (SCCP) Inspection
• Delete—Deletes a message ID filter.
• Move Up—Moves an entry up in the list.
• Move Down—Moves an entry down in the list.
Modes
The following table shows the modes in which this feature is available:
Add/Edit SCCP (Skinny) Policy Map (Security Level)
Configuration > Global Objects > Inspect Maps > SCCP (Skinny) > SCCP (Skinny) Inspect
Map > Basic View
The Add/Edit SCCP (Skinny) Policy Map pane lets you configure the security level and additional
settings for SCCP (Skinny) application inspection maps.
Fields
• Name—When adding an SCCP (Skinny) map, enter the name of the SCCP (Skinny) map. When
editing an SCCP (Skinny) map, the name of the previously configured SCCP (Skinny) map is shown.
• Description—Enter the description of the SCCP (Skinny) map, up to 200 characters in length.
• Security Level—Select the security level (high or low).
–
Low—Default.
Registration: Not enforced.
Maximum message ID: 0x181.
Minimum prefix length: 4
Media timeout: 00:05:00
Signaling timeout: 01:00:00.
RTP conformance: Not enforced.
–
Medium
Registration: Not enforced.
Maximum message ID: 0x141.
Minimum prefix length: 4.
Media timeout: 00:01:00.
Signaling timeout: 00:05:00.
RTP conformance: Enforced.
Limit payload to audio or video, based on the signaling exchange: No.
–
High
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
••••—