Filter
Top Products
76-20
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 76 Configuring Logging
Configuring Logging
Sending All Syslog Messages in a Class to a Specified Output Destination
To send all syslog messages in a class to a specified output destination, enter the following command:
Enabling Secure Logging
To enable secure logging, enter the following command:
Including the Device ID in Non-EMBLEM Format Syslog Messages
To include the device ID in non-EMBLEM format syslog messages, enter the following command:
Path Purpose
Configuration > Device Management > Logging >
Logging Filters
Overrides the configuration in the specified output destination
command. For example, if you specify that messages at
severity level 7 should go to the internal log buffer and that ha
class messages at severity level 3 should go to the internal log
buffer, then the latter configuration takes precedence. To
specify that a class should go to more than one destination,
choose a different filtering option for each output destination.
Path Purpose
Configuration > Device Management > Logging > Syslog
Server
Enables secure logging.
Path Purpose
Configuration > Device Management > Logging > Syslog
Setup > Advanced
Configures the ASAto include a device ID in
non-EMBLEM-format syslog messages. You can specify only
one type of device ID for syslog messages. If you enable the
logging device ID for the admin context in multiple context
mode, messages that originate in the system execution space
use a device ID of system, and messages that originate in the
admin context use the name of the admin context as the device
ID.
Note If enabled, the device ID does not appear in
EMBLEM-formatted syslog messages nor in SNMP
traps.